About VapeOnly vPulse Dual-output Starter Kit 900mAh
VapeOnly is known as a high-end electronic cigarette brand that produces luxurious, high-powered and efficient mods for every vape enthusiast, no matter what their preferred styles are. This brand is constantly updating their styles and selections, determined to never let their customers down. Their newest products, including the VapeOnly vPipe kit, the VPulse battery and their unique cartomizers, can all be found here as well as a vast selection of other VapeOnly products for your consideration, all at a low prices.
vPulse has a vAir D16 tank and a vPulse battery, all in a great kit for you to enjoy. You have DC output as well as lots of Pulse output. In the end you have great flavors and quick vaping at a great quality.
VapeOnly vPulse Starter Kit - 900mAh
Video Review
Product Instructions
This kit integrates two output modes, regular DC (direct current) output mode and new Pulse output mode. Heating accelerates and vapor is enhanced. More vapor produced under the same voltage or wattage.
Parameters
Length(cartomizer loaded): 200mm
Diameter: 17mm
Maximum Current Output: 4A
Variable voltage : 3.3V - 5.5V
Variable wattage : 3W - 12 W
Color: Black, Stainless
VapeOnly vPulse Dual-output Starter Kit 900mAh contains
- 1 x vAir D16 Clear Atomizer (1.8ohm dual-coil unit pre-installed)
- 1 x vPulse 900mAh Manual Battery
- 1 x Replacement Dual-coil unit (1.8ohm)
- 1 x Decorative Ring
- 1 x USB Cable
- 1 x Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
Detailed Instructions
Features
Airflow control adjustable
304 Stainless Steel
2 output modes available, creative PULSE output
Variable voltage and wattage
USB passthrough function
Ohms meter
Settings memory function
LCD display
Healthy stainless steel coil without chroming
General protections, such as short circuit protection, over-charge and discharge protection, 5-click lock and atomizer protection
Operation Guide
1. vPulse Battery UsageThere’re three buttons on vPulse battery. All functions can be activated by using those three buttons.
1.1 Buttons
“O†button, turn on/off the battery, press to smoke and switch output mode - DC and Pulse
“+†button, increase voltage and wattage, switch between VV and VW mode
“-†button, decrease voltage and wattage, and detect real-time resistive load
1.2 On/Off
In off status, continuous click “O†button 5 times within 2 seconds to enter into working status; in working status, continuous click “O†button 5 times within 2 seconds to turn the battery off.
1.3 Output Mode
1. DC mode: In off situation, press the “O†button and release until white light blinks. It enters into DC output mode after it’s turned on.
2. Pulse mode: In off situation, press the “O†button and release until blue light blinks. It enters into Pulse output mode after it’s turned on.
3. Both voltage and wattage can be adjusted under each mode.
1.4 VV/VW Changing-over
1. From VV to VW: Press “+†button for 5 seconds and “O†button blinks 3 times to show changing-over succeeds. Then wattage can be changed from 3W to 12W in 0.5 increments. The LCD shows “w†to indicate it’s in VW mode.2. From VW to VV: Press “+†button for 5 seconds and “O†button blinks 3 times to show changing-over succeeds. Then voltage can be changed from 3.0V to 5.0V in 0.1 increments. The LCD shows “v†to indicate it’s in VV mode.
In working status, keep pressing “-†button for 5 seconds, the battery will detect current atomizer resistance and show the result on LCD screen for 3 seconds.
1.6 Battery Level Indicator
The LCD battery icon displays real-time battery power and the battery indicator is independent of other information on the LCD screen:
<3.3v, empty display;
3.3v - 3.6v, one frame display;
3.6v - 3.8v, two frames display;
3.8v - 4.0v, three frames display;
>4.00v, full frames display.
1.7 Parameters Lock
In working status, press “+†and “-†button at the same time for 3 seconds to turn on or turn off parameters lock. If the LCD screen shows a lock symbol, variable voltage, variable wattage and resistance detection functions aren’t useable.
1.8 Charging
Connect the Micro-USB cable to a computer or an AC-USB adapter into a power outlet to charge the battery. The battery icon will run up from current display repeatedly. Full frames display shows the battery is fully charged.
2.1 How to adjust airflow
To increase airflow, please rotate the airflow control valve clockwise;
To decrease airflow, please rotate the airflow control valve counter-clockwise.
Rotate the airflow control valve to the most comfortable one for you.
1. Turn upside down the clear atomizer, and then screw off the bottom base.
2. Fill liquid into the space between the glass tank and center metal tube. DO NOT over fill or get liquid into the center hole.
3. Carefully screw the bottom base back onto the upper hardware.
4. Let the clear atomizer stand for 2 minutes before use. It can let e-liquid absorbed into the wick/atomizer chamber to avoid burning taste.
2.3 How to change replacement coil
First, turn upside down the clear atomizer and screw off the bottom base.
Second, disconnect the old coil unit from the bottom base, replace with a new one.
Last, screw the base back to the tube tightly.
Order Tips
- VapeOnly vPulse Dual-output Starter Kit 900mAh contains 510/eGo thread.
- Two color options for battery, matte black and steel
- You still need to choose e-juice to enjoy vaping.
- There is CE mark on the battery, NO CE mark on the vAir D16 Clear cartomizer.
Guarantee
DOA (Dead On Arrival) ONLY!
