Vape Forward Vaporflask Stout 100W TC Box MOD

About Vape Forward Vaporflask Stout 100W TC Box MOD

The VFV TC Box Mods consists of Vaporflask lite, Vaporflask classic and vaporflask stout. Vaporflask stout is a device with Max 100W output and is a 26650 device. Vaporflask classic offers max 150W output and is an 18650 device. Vaporflask lite offers max 75W power and is an 18650 device.

100W Vape Forward Vaporflask Stout TC Box MOD W/O Battery

Product introduction

Parameters

Size: 46.5 x 30 x 85.3 mm
Thread Type: 510 thread
Cell type: High-rate 26650 cell (discharging current should be above 35A ) ; or a 18650 battery
Output Mode: TC-Ni/TC-Ti/TC-SS/VW/Bypass/TCR Mode
Output Wattage: 1-100w
Resistance Range: 0.05-1.5ohm for TC mode; 0.1-3.5ohm for VW/ Bypass mode
Temperature Range: 100-315°C/ 200-600°F

Vape Forward Vaporflask Stout 100W TC Box MOD contains

• 1 x Vaporflask Stout (with a battery sleeve for 18650)
• 1 x USB cable
• 1 x User manual
• 1 x Warranty card

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

• It can only be shipped to the United States.
• It doesn't include a 26650 battery or 18650 battery cell. We suggest you use constant discharge current 35A battery.

Features

100W Power
Upgradable firmware
Variable temperature control
Easy to operate user interface
Innovative hinged battery door
Optional:TC-Ni/TC-Ti/Ti-SS/VW/BYPASS/TCR mode

Operation Guide

Power on/off: press the fire button 5 times in quick succession to turn the device on and off.

Stealth function: While the device is on, simultaneously hold the fire button and the up button. This will switch the screen display on and off.

Resistance locked function: While the device is on, simultaneously hold the fire button and the down button to enter resistance lock mode. To disable resistance lock, repeat the procedure. (It should be carried out at room temperature.)

Adjust lock function: While the device is on, simultaneously press the up and down buttons. This will lock and unlock the adjustment button functions.

Micro UBS port function: The USB port can be used for charging and upgrading firmware. It is better to take out the battery cells to charge.

Switch the display: By pressing the up and down buttons simultaneously in shutdown state, the screen display will rotate 180 degrees.

Shift among VW/TC-Ni/TC-Ti/TC-SS/TCR mode: When the device, powered on, press the fire button 4 times in quick succession to enter the mode switching state. By pressing the up or down buttons to shift among VW/Tc-Ni/TC-Ti/TC-SS/TCR M1, TCR M2 and TCR M3 mode.

Guarantee

3 months of Vaporflask Stout MOD. Please check guarantee policy.

Safety(+Efficiency(+)Tech