About Think Vape Finder 250W TC Box MOD with DNA250 Chip
Some of the most popular products from this brand are Finder 250 and 167. They bring a stellar vaping experience all while being super fun and easy to use too, which is always great.
Product Instructions
Parameters
Size: 40 x 89 x 49mm
Chip: Evolv DNA 250 chip
Power range: 5W to 250W
Temperature range: 100°C to 300°C or 200°F to 600°F
Battery: Three 18650 batteries (not included)
Charging: 2A Micro USB charging
Material: Zinc Alloy, Carbon Fiber, Genuine Leather, SS connector & abalone shell, toughened glass
Think Vape Finder 250W TC Box MOD with DNA250 Chip contains
- 1x Think Vape Finder 250W Mod
- 1x USB Cable
- 1x English Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
- 510 threaded
- No 18650 battery included. You shall purchase it separately.
Features
Powered by DNA 250 Chip
Firmware upgradeable
Fast 2A Micro USB charging
Fully customize with Escribe software
Various safety protections
510 stainless steel threaded
Operation Guide
Locked mode: Pressing the fire button 5 times with less than 7 seconds will cause the device to enter Locked mode. To exit locked mode, press the fire button 5 times.Stealth mode: While locked, holding the fire and the down buttons simultaneously for 5 seconds will switch to stealth mode. In this mode the display is off. It will still show error and lock message. To switch back to normal display mode, hold down the fire and the down buttons simultaneously for 5 seconds.
Power locked mode: While unlocked, holding down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change the power setting. To exit Power Locked mode, hold the up and down buttons for two seconds.
Resistance lock: While locked, holding both the fire and up buttons for two seconds to enter Resistance Lock mode. To disable resistance lock, repeat the procedure to unlock it.
Shift between VW/TC modes: Pressing the fire button 5 times, the device will directly enter VW mode. You can adjust the output wattage from 5W to 167W by pressing up or down button. In this mode, holding both the up and down buttons simultaneously for two seconds will enter TC mode. In TC mode, you can adjust temperature from 200F to 600F or 100C to 300C. Press the fire button or leave the display for 10 seconds on current setting to confirm and exit the TC mode. Then Pressing the fire button 5 times, the device will enter VW mode again.
Charging: You can take out the lithium-batteries from the device and then charge the cells. Moreover, it can also be charged via USB cable.
Guarantee
6 months for Finder 250 MOD. Please check guarantee policy.
