About SMOK Pyrex Aro Glass Atomizer 2.5ml 5pcs
SMOK is a vaping company, which was established in 2010 and is based in Shenzen that has taken the vaping world by storm. This company is known for their innovation, resulting in the first atomizer having dual coils. The company is highly regarded as being the most advanced in the industry, and is known for their R&D team, which is meticulous in coming up with new advances.
Pyrex Aro is an attractive vape that has been launched by SMOK. It features a bottom coil mechanism and the juice tank of this device has a capacity of 2.5ml. The device is pre-installed with the innovative eGo thread technology from SMOK in order to make the device compatible with MODs and batteries of the eGo series.
- Pyrex glass tank tube
- Low heating place
- 2.5ml capacity
- eGo thread
- Fixed metal nozzle
- Replaceable atomizer head
Order Tips
- Pyrex glass tube with a 2-window metal cover.
- 2.5ml capacity and 1.8ohm coil. Single Coil
eGo thread, it compatible with eGo/eGo-T/eGo-C/eGo-C Twist battery and eVic.
It's a empty cartomizer, you still need order VapeNico e-liquids.
- Replaceable coils, please click here.
Including 5pc SMOK Pyrex Aro Bottom Coil Glass Atomizer - 2.5ml 5pc
Parameter Resistance 1.8 +/- 0.2ohm Length
79mm
Diameter
16mm
Click download to get certificate: CE; ROHS;
Detailed Instructions
Each atomizer contains 3 parts:Mouthpiece and tube, atomizer head and connector base.
How to use?
1. Turn upside down the cartomizer, then screw off the connector.
2. Use the syringer or dropper to fill less than 2.5ml e-liquid. Do not overfill it.
3. Allow 1-2 minutes for the e-liquid to feed into the coil before you start to vaping. Or Give the cartomizer a quick shake.
4. Carefully screw on the connector, connect it with the battery and enjoy it.
How to replace the coil unit/coil head?
Turn upside down the cartomizer, then screw off the base. Take out the old coil unit from the bottom base, replace with new one. So easy!
How to remove your BCC cartomizer from battery?
Hold the bottom of the clear cartomizer when you separate it from battery. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.
Using Tips:
1. Make sure the cartomizer should be screwed back tightly onto the Joye eGo/eGo-T/eGo-C/eGo-C Twist battery.
2. Be sure that the coil unit is screwed into the cartomizer tightly. If you get few vapor when you use, try to make the clear cartomizer upside down to let the fibre wick and coil get e-liquid, which are on the top of the cartomizer.
3. When the cartomizer does not perform well or stops working due to heavy use, just replace the coil unit with a new one, you will get a new cartomizer!
Package
Simple packing. Customary Packing from the factory,the packing is subject to change without notice.
