About Joyetech Cuboid 200 TC Box MOD
Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.
Product Instructions
Parameters
Output Wattage: 1 - 200W
Modes Available: VW/VT/Bypass/TCR/Logo/Preheat
Resistance Range: 0.05 - 1.5ohm for VT Mode;0.1 - 3.5ohm for VW/Bypass Mode
Temperature Range: 100 - 315℃/ 200 - 600F
Battery: 3 x 18650 battery (continuous discharge current ≥ 25A)
Color: Black, Silver, Grey
Joyetech Cuboid 200 TC Box MOD contains
- 1 x Joyetech Cuboid 200 MOD
- 1 x Cuboid 200 skin
- 1 x USB Cable
- 1 x User Manual & Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- With 510 thread.
- It doesn't include 18650 batteries. You need buy them separately.
- You can download certificates.
Features
200W maximum output using triple cells
New interface with upgradeable firmware
Custom logo and preheat function
Separate battery bars and multi-protections
Power On/ Off: Put the device up side down. Press the battery cover and push it open. Put three 18650 batteries inside and push the cover back. Press the fire button 5 times in quick succession to turn the device on or off.
Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale. Please choose the correct mode and adjust the wattage to a proper range according to your atomizer before use.
Charging & Upgrading: Please always use married high-rate 18650 cells, don't mix with different brands. We kindly suggest you take the cells and charge them in a stand alone charger. You can download the new firmware at Joyetech site.
Switch the mode: Press the fire button 3 times to enter into the mode options. Then press "+" button to switch between VW/BYPASS/TC(Ni,Ti,SS)/TCR(M1,M2, M3)modes. Press the fire button to confirm.
Stealth function: When the device is on, simultaneously hold the fire button and "-" regulatory button to turn on/off the stealth function. When the stealth is on, you can still vape with the display off.
Key lock function: When the device is on, simultaneously press the "+" and "-" buttons to turn on/off the button lock function.
Switch the display: When the device is off, simultaneously press "+" and "-" buttons to turn the display upside down. Repeat it to turn it back.
Guarantee
3 months for Cuboid 200 MOD. Please check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
