About Joyetech eVic VTwo Mini Express Kit
Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.
The Evic stand as one of the most in demand vegan products on the market today. It has always been a significant solution in the Ecig industry and there are many different versions of this mod on the market. Be sure to check out some of the options including the e vic basic, evic vtwo, evic vt and more. The temperature controls and the options on these items make them each great for their individual purposes.
Product Instructions
Parameters
Size: 22.20 x 38.20 x 82.00mm
Output mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR(M1, M2, M3)
Output wattage: 1-75W
Resistance range: 0.05 - 1.5ohm for VT mode
0.1 - 3.5ohm for VW/Bypass mode
Temperature range: 100 - 315℃ / 200 - 600F
Colors: orange, blue, white, burgundy, black, gold, cyan, grey, red
Joyetech eVic VTwo Mini Express Kit contains
- 1 x Joyetech eVic VTwo Mini MOD W/O Battery
- 1 x USB cable
- 1 x eVic-VTC Mini Skin
- 1 x Manual&Warranty card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Features
Real time clock display & screen protection
RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR modes
Dual circuit protection
Upgradeable firmware
Replaceable battery and magnetic battery cover
Spring loaded 510
Convenient USB charging
Variable colors
Operation Guide
Power on/off:
Press the fire button 5 times in quick succession to turn the device on/off.Slide down the battery back cover and put one 18650 cell into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
Recommended: high-rate 18650 cells, for example, Sony US 18650VTC4
Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Set Screen Protection Time: While the device is on, simultaneously hold the fire button and the left regulatory button to enter into the LED Color interface. Then press the right button again to enter into Screen Protection setting, and press Left button to choose the time. Press the fire button to confirm the choice.
Adjustment Lock Function: While the device is on, simultaneously press the two regulatory buttons.This will switch between Adjustment Lock and Adjustment Unlock function.
In adjustment Lock mode, the regulatory button will not function to prevent accidental VT/VW/Bypass setting adjustments.
Switch the Display Mode: Simultaneously press the two regulatory buttons in power off state, the display will rotate 180 degrees.
Shift among Modes:
Press the fire button for three times to enter into menu . The 1st row will blink. Press the right button to switch among TEMP, TCR POWER and BYPASS mode. Press the fire button or leave it blink for 10s on the current setting to confirm and exit the menu.
Under TEMP, TCR mode, while flashing, press the left button to enter into the subsidiary menu: VT, PWR, COIL and AMP.
While adjusting VT, press the right button to switch among Temp NI, TI and SS316/M1, M2 and M3 mode. Press the fire button to confirm.
When AMP row is flashing, press the right button to switch among AMP, PUFF and TIME.
Under POWER, BYPASS mode, press the left button to enter into the subsidiary menu.
In power-off condition, Press the fire button and right button for 5sto enter TCR set menu. Under TCR mode, while mode indication flashing, press the left button to enter into the subsidiary menu, sub menu will flash, press the right button to switch and press the fire button to confirm.
Under TEMP, TCR mode, temperature can be adjusted. Long pressing the right or left regulatory button will make the temperature setting rapidly increase or decrease.
In VW mode output wattage can be adjusted from 1W-60W by pressing the regulatory button. Long pressing the right or left regulatory button will make the wattage setting rapidly increase or decrease.
New atomizer coil installation: when replacing a new atomizer, it may require resetting of the atomizer "base resistance";
Wattage Adjustment in VT Mode: wattage can be adjusted in VT mode. Press the fire button 3 times to enter the menu. Press the left button, and the second row will blink. Press the right button to increase the wattage, and press fire button to confirm.
Please note:
The ideal output wattage in VT mode should be 30-75W, because when the output wattage is below 30W, it is difficult to reach 450ËšF;
VT mode only supports a maximum of 1.5ohm. The device will automatically switch to VW mode when the resistance is larger than 1.5 ohm;
When using a new VT atomizer head, please drip a few drops of e-juice in the cotton of atomizer head and guarantee it is moist before the first use to reach the best performance.
- It doesn't come wit liquids, you shall buy separately.
- It doesn't include a wall adapter.
- You can download CE, EMC and RoHS certificates.
Guarantee
3 months for eVic VTwo Mini MOD. Pls check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
