About Joyetech eVic Basic TC MOD 1500mAh
Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.
The Evic stand as one of the most in demand vegan products on the market today. It has always been a significant solution in the Ecig industry and there are many different versions of this mod on the market. Be sure to check out some of the options including the e vic basic, evic vtwo, evic vt and more. The temperature controls and the options on these items make them each great for their individual purposes.
Joyetech eVic Basic TC MOD - 1500mAh
Product Instructions
Parameters
Size: 22 x 32 x 55 mm
Battery capacity: 1500mAh
Battery cell type: 20400
Output mode: RTC/VW/VT(Ni/Ti/SS316)/Bypass/TCR
Output wattage: 1- 60W
Temp range: 100 - 315℃(200 - 600F)
Resistance range: 0.05 - 1.5ohm for VT/TCR modes; 0.1 - 3.5ohm for VW/BYPASS modes
Joyetech eVic Basic TC MOD 1500mAh contains
- 1 x eVic basic Mod Battery
- 1 x USB Cable
- 1 x Manual
- 1 x Warning card
- 1 x Warranty card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Features
Ultimate compact with intuitive design
Supports RTC/ VW/VT/ BYPASS /TCR Mode
Real time clock & Custom logo function
Dual circuit protection and upgradeable firmware
Power on and off: Press the fire button 5 times in quick succession, the screen will on. Then it's ready to use. In the same way, the device will be turned off by pressing another 5 times in quick succession.
Vaping: Hold the fire button and inhale the mouthpiece. Release the fire button and exhale.
Charging and upgrading: Simply connect the device with a micro USB cable to charge or upgrade. When it's fully charged, the display will go out.
Set screen protection: When the device is on, simultaneously hold the fire button and the right regulatory button to enter into adjustment interface. Press the right button again to enter into screen protection time setting. Choose the protection time and press the fire button to confirm.
Reset: Should you get stuck while upgrade, just press the "+" button and then insert into the reset hole with a needle to restart.
Switch among different modes: Press the fire button 3 times to enter into the setting menu. Press the right regulatory button to switch among TEMP, TCR, Power and BYPASS modes. Press the fire button to confirm. And press left button while flashing to enter into subsidiary menu.
How to set the TCR: In power-off condition, press the fire button and right regulator simultaneously for about 5 seconds to enter into TCR set menu:
1. Press right/left regulator to choose between TCR M1, M2, M3;
2. Then press the fire button to select certain parameter;
3. Press the regulator to set the parameter;
4. Long press the fire button or leave it for about 10 seconds to confirm.
Guarantee
3 months of eVic Basic TC MOD. Please check Guarantee Policy.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
You can download certificates.
