Joyetech eVic AIO 75W VT Kit

About Joyetech eVic AIO 75W VT Kit

Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.

The Evic stand as one of the most in demand vegan products on the market today. It has always been a significant solution in the Ecig industry and there are many different versions of this mod on the market. Be sure to check out some of the options including the e vic basic, evic vtwo, evic vt and more. The temperature controls and the options on these items make them each great for their individual purposes.

75W Joyetech eVic AIO VT Kit W/O Battery

Product introduction

Parameters

Size: 26*48*105mm
Output Mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR
Output Wattage: 1-75W
Resistance range: 0.05 - 1.5ohm under VT/TCR mode; 0.1 - 3.5ohm under VW/Bypass mode
Temperature range: 200~600F or 100~315℃
E-juice Capacity: 3.5ml
Colors: black, silver

Joyetech eVic AIO 75W VT Kit contains

• 1 x eVic AIO
• 1 x NotchCoil 0.25ohm DL.
• 1 x BF SS316 0.5ohm coil head DL.
• 1 x LVC Clapton 1.5ohm MTL.
• 1 x QCS coil
• 2 x mouthpiece
• 1 x USB Cable
• 1 x Adapter
• 2 x Sticker
• 1 x Manual & Warranty Card
• 1 x Warning card

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Features

Operation Guide

Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.

Charging: Simply charge eVic AIO by connecting it with a computer or a wall adapter via USB cable. When it is fully charged, the display will go out.

Change the led color: When the device is on, hold the fire button and right regulatory button simultaneously to enter into LED Color interface.

Set screen protection time: When the device is on, hold the fire button and right regulatory button (on the bottom) simultaneously to enter into adjustment interface. Press the right regulatory button again to enter into screen protection time setting.

Shift between TEMP/POWER/Bypass/TCR Modes:
Press the fire button for three times to enter into the setting menu. Press the right regulatory button to shift between different Modes when the battery is on.
(1)under POWER or BYPASS mode, press the left regulatory button to enter into subsidiary menu.
(2)under TEMP or TCR mode, press the left regulatory button to enter into subsidiary menu: VT, PWR, COIL and AMP. Coil temperature can be adjusted with regulatory button.Under VT mode, maximum initial wattage can be adjusted. Press the fire button 3 times to enter the menu. Wattage can be adjusted with regulatory button.

Atomizer Head Replacement: unscrewing the top cap, the atomizer head is located on the cap. Screw and replace it.

E-juice refilling:E-juice filling can be easily achieved by removing the top cap and injecting through the side holes (not the vent pipe) directly.

Air inflow Control: By rotating the airflow control ring to adjust the airflow.

Apply the Atomizer Adapter
Unscrew the airflow ring and remove the whole part. Screw the atomizer adapter tightly with a coin, then you're able to apply multiple types of atomizers with the 510 pin.

• eVic AIO Kit doesn't come with e-liquids. You shall purchase e-liquids separately.
• There is CE mark on battery end.
• Compatible with NotchCoil, BF coil, BF RBA.
• You can buy replacement Atomizer body and Body Sticker.
• You can download CE, FCC, EMC and RoHS certificates.

Guarantee

3 months for battery. Pls check Guarantee Policy.

Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.

Safety(+Efficiency(+)Tech