About Joyetech eGo ONE VT Starter Kit 2300mAh
Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.
The Ego One is one of the most popular atomizer heads available on the market today. It can deliver a smooth inhale process and it is produced using a nickel and titanium coil. Over 200 coils are built into every atomizer for advanced temperature control. The v2 direct output on this device offers dual circuit protection and safety guards. The airflow system here is impeccable.
Joyetech eGo ONE VT Kit - 2300mAh
Product Instructions
Parameters
eGo One VT battery:
Capacity: 2300mAh
Size (length and diameter): 142 x 22mm
Resistance range: 0.2ohm -1.0ohm for VT mode
0.4ohm - 3.5ohm for VW mode
eGo One Mega atomizer:
Capacity: 4ml
Atomizer's size (length and diameter): 58.7 x 22 mm
Joyetech eGo ONE VT Starter Kit 2300mAh contains
- 1 x eGo ONE VT 2300mAh battery
- 1 x 4ml eGo ONE mega Atomizer tank (no coil)
- 1 x eGo One CL-Ni Atomizer head (0.2ohm)
- 1 x eGo One CL-Ti Atomizer head (0.4ohm)
- 1 X eGo One CL head (1.0ohm)
- 1 x USB cable
- 1 x AC adapter
- 1 x User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Detailed Instructions
Features
1. VT-Ni, VT-Ti and VW mode
2. Three Levels of Watts and Temps
3. Smart, Power and Comprehensive
4. 2300mAh Large Capacity
Operation Guide
Power on and off: press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE VT is ready for use. In the same way, eGo ONE VT will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE VT by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
Shift Between VT-Ni/VT-TI/VW Modes: when the device is off, long press the fire button, you can shift between VT-Ni/VT-Ti/VW modes to adapt to the coils.
Adjustment of levels: when it's powered on, press the fire button three times to shift among Low/Medium/High levels of Wattage (under VW mode)/temperature (or VT mode) to your preference.
Output Levels for eGo One VT (VW mode)
| Level | 0.4-0.8ohm | 0.8-1.6ohm | 1.6-3.5ohm |
| Low | 20W | 10W | 10W |
| Medium | 25W | 15W | 7.5W |
| High | 30W | 20W | 5W |
Temp Levels for eGo One VT (VT Mode)
| Level | Ti Coil | Ni Coil |
| Low | 430F | 430F |
| Medium | 470F | 480F |
| High | 600F | 600F |
Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery capacity Light condition
60% - 100% Stay lit
30% - 59% Slowly flashes
10% - 29% Moderately flashes
0 - 9% Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
Soak the atomizer head: when using a new atomizer head, please drip a few drops of e-juice in the cotton of atomizer head to reach the best performance.
ň†oytd
E-juice filling: separate the atomizer from the battery and inject the liquid directly into the cambered slot.
Order Tips
- It doesn't come with e-liquids. You shall buy separately.
- It works with eGo One atomizer heads.
Guarantee
Please check Guarantee Policy.
Guarantee period: 3 months for batteries, no warranty for the rest spare parts.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
