About Joyetech eGo ONE Starter Kit 1100mAh
Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.
The Ego One is one of the most popular atomizer heads available on the market today. It can deliver a smooth inhale process and it is produced using a nickel and titanium coil. Over 200 coils are built into every atomizer for advanced temperature control. The v2 direct output on this device offers dual circuit protection and safety guards. The airflow system here is impeccable.
Joyetech eGo ONE Kit
Product Instructions
Parameters
Battery capacity: 1100mAh
Battery size (length and diameter): Â 58.5mm *19mm
Atomzier's capacity: 1.8ml
Atomizer's size (length and diameter): 46mm *19mm
Joyetech eGo ONE Starter Kit 1100mAh contains
- 1 x eGo ONE 1100mAh battery
- 1 x 1.8ml eGo ONE Atomizer (1.0ohm coil pre-installed)
- 1 x 0.5ohm coil for eGo ONE Atomizer
- 1 x USB charger
- 1 x AC adapter
- 1 x Spare mouthpiece
- 1 x User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Detailed Instructions
Features
1. Two types of atomizer heads
2. Adjustment of air inflow
3. 1100mAh large capacity
4. Short circuit protection,atomizer protection, low voltage protection, resistance examination and battery display function
Operation Guide
Power on and off: press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE is already for use. In the same way, eGo ONE will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
E-juice filling: separate the atomizer from the battery and inject the liquid directly into the cambered slot.
Atomizer head replacement: unscrew the atomizer cone, the atomizer head is located on the base. Just unscrew it and replace and clean. (note: please do not wash the atomizer head with water. Simply scrub it with alcohol cotton or clean with dry cloth.)
Adjustment of air inflow: rotating the ring on the atomizer base clockwise to decrease the air inflow, and counterclockwise to enlarge the air inflow.
Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity   Light condition
60% - 100% Â Â Â Â Â Â Stay lit
30% - 59% Â Â Â Â Â Â Slowly flashes
10% - 29% Â Â Â Â Â Â Moderately flashes
0 - 9% Â Â Â Â Â Â Â Â Â Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
Order Tips
- It doesn't come with e-liquids. You shall buy separately.
Guarantee
Please check Guarantee Policy
Guarantee period: 3 months for batteries, no warranty for the rest spare parts.
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
