About Joyetech eGo One CT Battery 2200mAh
Joyetech is offering you electronic cigarette and e-liquid products too. They bring in a ton of VG and PG flavors too. Everything is easy to carry, and the company releases a plethora of e-cig kits for your convenience like Atopack Penguin, eVic VT, Primo and AIO, as well as Cuboid, UNIMAX and many others.
The Ego One is one of the most popular atomizer heads available on the market today. It can deliver a smooth inhale process and it is produced using a nickel and titanium coil. Over 200 coils are built into every atomizer for advanced temperature control. The v2 direct output on this device offers dual circuit protection and safety guards. The airflow system here is impeccable.
Joyetech eGo One CT Battery - 2200mAh
Parameters
Size (length x diameter): 89 x 19mm
Capacity: 2200mAh
Resistance range: 0.2ohm - 1.0ohm for CT mode
0.4ohm - 3.5ohm for CW mode
Joyetech eGo One CT Battery 2200mAh contains
- 1 x eGo One CT battery -2200mah
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Detailed Instructions
Features
CT-Ni, CT-Ti/CW Mode Applied
Tiny Shape with Easy Operation
Varied Levels of Watts and Temps
Many Color Options
Operation Guide
Power on and off: pressthe button for 5 times in quick succession, the button light will flash5 times to indicate eGo ONE CT is ready for use. In the same way, eGoONE CT will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE CT by connecting it with a computer or a walladapter via USB cable. When it's fully charged, the button light will goout.
Shift Between CT-Ni/CT-Ti/CW Modes: when thedevice is off, long press the fire button, you can shift betweenCT-Ni/CT-Ti/CW modes within 2 seconds. And release the fire button topreserve the current mode.
Note: only use temp control coils under CT mode. Damages will be caused when temp control coils are accidentally used under CW mode.
Adjustment of levels: whenit's powered on, press the fire button three times to shift amongLow/Medium/High levels of Wattage (under CW mode)/temperature (or CTmode) to your preference.
Output Levels for eGo One CT (CW mode)
| 0.4-0.8ohm | 0.81-1.6ohm | 1.61-3.5ohm |
| 25W | 15W | 7.5W |
Temp Levels for eGo One CT (CT Mode)
| CT-Ti | CT-Ni |
| 470F | 480F |
Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity Light condition
60% - 100% Stay lit
30% - 59% Slowly flashes
10% - 29% Moderately flashes
0 - 9% Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
Order Tips
- It doesn't come with Atomizers. You shall buy it separately.
- It doesn't have a USB cable.
Guarantee
DOA (Dead on Arrival) ONLY!
Note:We now need serial number to proceed after-sales service. Please kindlypreserve the serial number of product if it's available.
