Innokin iTaste SD20 Kit 2000mAh

About Innokin iTaste SD20 Kit 2000mAh

Innokin is one of the main factories in the industry and certainly one of the top e-cig companies in China. They are always coming up with great designs and features, like the SVD MOD, VTR and VV MOD, not to mention the Cool Fire 1 and 2, as well as the iTaste model. All of these add up to bring in front rewarding results and benefits you will enjoy. There's also the iClear series cartomizer. You get all you need for the best vaping experience.

The iTaste SD20 has a great Evolv DN20 chip. It also includes a 2000 mAh battery and 20W of output. That alone makes it a great option for any vaper.

Innokin iTaste SD20 Kit - 2000mAh

Product Instructions

Parameters

iTaste SD20
Battery: 2000mAh
Input Voltage: 3.2~4.3V
Output Voltage: 2.0~6.3V
Maximum Output Current: 6.0A
Output Wattage: 5.0-20W
Atomizer Resistance: 0.5-3.0 Ohm (0.5 Ohm minimum)

Endura T22 Tank

Capacity: 4ml
Diameter: 22mm
Minimum resistance: 1.2ohm

Innokin iTaste SD20 Kit 2000mAh contains

• 1 x iTaste SD20 MOD
• 1 x 4ml T22 Tank (with coil)
• 1 x set body cover for SD20
• 1 x USB cable
  
• 4 x O-rings
• 1 x Mouthpiece
• 1 x manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Features

Internal 2000mAh Capacity
Max output 20W
Over heat protection
Atomizer short circuit protection
Short circuit protection
25-second cutoff

Top fill twist design

Prism airflow technology

100% Japanese Organic Cotton
4ml Stainless Steel & Pyrex Glass Tank

Delrin drip tip

Operation Guide

Turn On/OFF: quickly press fire button 3 times to turn on/off SD20.
Lock the adjust button: Hold both "+" and "-" buttons for 5 seconds to lock the button. Repeat it to unlock.

How to refill the Tank

1. Carefully unscrew the top cap from the Tank.
2. Add e-Liquid against the inside wall of the Tank.

Important: After refilling, please wait 5 minutes before vaping.

Replace a coil
1. Hold the Tank with the threading up.
2. Unscrew the bottom Metal cap of the Tank
3. Hold the coil and gently pull to remove.
4. Carefully and safely dispose of the used coil. Keep away from children and pets.
5. Properly align the flat sides of the new coil.
6. Push to fully insert the new coil firmly into Tank.
7. Ensure that the coil is completely inserted.
8. Carefully and firmly tighten the metal cap.

Caution: Make sure there is no e-liquid in the Tank before you pull out the coil

• It doesn't come with liquids, you shall buy separately.

Guarantee

3 months of iTaste SD20 MOD. Please check Guarantee Policy.

Safety(+Efficiency(+)Tech