About Hugo Vapor Boxer V2.0 188W TC Box MOD
Product Instructions
Parameters
Size: 90 x 40 x 35mm
Material: Zinc Alloy + Stainless Steel
Variable Wattage: 1.0W - 188.0W
Output range Voltage: 0.5V - 8.4V
Maximum current: 30A
Range battery voltage: 6.0V - 8.4V
Temperature Control range: 100 - 300C / 200 - 600F
Resistance Range: 0.06 ohm - 3.0 ohm
Powered by 2 x 18650 batteries (not included)
Hugo Vapor Boxer V2.0 188W TC Box MOD contains
- 1 x Boxer V2.0 188W
- 1 x USB Cable
- 1 x Manual
- 1 x Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- It doesn't come with 18650 battery, you shall buy it separately.
- 510 thread.
Features
Powered by HUGO-VAPOR
188W Max Power
0.96-inch OLED screen
TCR Setting & Curving heating
Dual series layout setup
All-in-one programme
Die cast zinc alloy material
Operation Guide
Power on/off: Click the fire button 5 times within 3 seconds, the device will power on with "HUGOVAPOR" and power off with "LOCKED CLICK 5x" logo.
Mode Switch: Click on "fire button" 3 times continuously within 3 seconds while the device is on, then click "up" or "down" button to change mode from "POWER" "Ti01" "Ni200" "Bypass" "S316L". Click on "fire" button for mode confirmation.
Display screen on/off: Click on fire and up button in 3s, it will lead to "Screen" selection, "stealth" and "display" will be displayed in cycle.
Power lock: Hold UP and DOWN button in 3 seconds, the power can not be adjusted at this mode. Repeat it to unlock the power.
Guarantee
3 months for Boxer V2.0 MOD. Please check Guarantee Policy.
