About Eleaf Lemo 3 Atomizer With RTA Base 4ml
Eleaf is one of the most recent e-ciggereate company offering quality products along with state of the art customer support. The company has regular customers who prefer its products. Some of the products that we offer include eleaf mini iJust battery, rebuildable atomizer, elaf iJust mod, iSmoka iGo Mod and several other products. You can visit our online shop and buy ismoka electronic cigerrate to get the best e-smoking experience.
The lemo by ELeaf comprises of Eleaflemo 2, lemo 3 RTA, Eleaflemo drop 2.7ml and EleafLemo RBA 5ml. Each of them are equipped with an extra heating coil, screws, cotton and screwer for the necessary DIY tasks. You can select the finest BRA atomizer for DIY enjoyment.
Eleaf Lemo 3 Atomizer With RTA Base - 4ml
Lemo 3 (Type A) comes with
- 1 x Lemo 3 Atomizer with RTA base
- 2 x 0.85ohm clapton coils
- 1 x Atomizer head base
- 1 x EC 0.3ohm head
- 1 x EC NC 0.25ohm head
- 1 x Glass tube
- 1 x Pure cotton
- 1 x Small tool (Tweezers)
- 1 x Screwdriver
- 6 x Screws
- 1 x Silicone ring
- 3 x O-rings
- 1 x User Manual
Lemo 3 (Type B) comes with
- 1 x Lemo 3 Atomizer with RTA base
- 2 x 0.85ohm clapton coils
- 1 x Glass tube
- 1 x Pure cotton
- 1 x Small tool (Tweezers)
- 1 x Screwdriver
- 6 x Screws
- 1 x Silicone ring
- 3 x O-rings
- 1 x User Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Features
304 stainless steel
Innovative Interior Design: can both be used with replaceable atomizer head and used with pre-made or self-built coil as RTA for DIY fun.
New Clapton Coil: When using the new pre-made clapton coils, you will get satisfying vapor production with nice flavor.
Top E-liquid Filling: The e-liquid can easily be refilled from the top by removing the top cap only.
Smooth Airflow: The unique structure of RTA base allows a smooth and steady airflow, bringing better vaping flavor.
Detached and reassembled structure
Operation Guide
How to use?
A: When used with pre-made or self-built coil as RTA
1. Screw off the atomizer base, loose the 2 screws on the RTA cap and take the RTA cap off.
2. Fix the pre-made or self-built coil on the RTA base, activate the coil with your device till it goes red, and then put the cotton through the coil after the coil cools down.
(Note: please make sure the finally fixed coil does not come into contact with the surface of the deck and inner wall of the RTA cap.)
3. Drip a few drops of e-liquid directly into the pre-made or self-built coil to make it fully saturated before use, put the RTA cap on and tighten the screws, and then screw the atomizer tube onto the atomizer base tightly.
4. Screw off the top cap from the atomizer, slowly fill e-juice into the atomizer along the glass tube and screw the top cap on tightly after filling.
(Note: please don't overfill and don't fill e-liquid into the air pipe; please take several puffs without activating the atomizer and leave it sit for several minutes before use.)
5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base.
6. Finally the Lemo 3 as RTA is ready for use.
B. When use with atomizer head as ordinary atomizer
1. Take off the RTA base from the atomizer base, and fix the atomizer head base on with screws tightened.
2. Drip a few drops of e-juice directly into the atomizer head to make it fully saturated before use, screw the atomizer head onto the atomizer head base tightly, and screw the atomizer tube on.
3. Screw off the top cap from the atomizer, slowly fill e-juice into the atomizer along the glass tube and screw the top cap on tightly after filling.
(Note: please don't overfill and don't fill e-liquid into the air pipe; please take several puffs without activating the atomizer and leave it sit for several minutes before use.)
4. The airflow can be adjusted by rotating the airflow control ring on the atomizer base.
5. Finally Lemo 3 atomizer is ready for use.
- You can select the vape juice here.
- You can buy EC Head (0.3ohm/0.5ohm), EC Head - Ni (0.15ohm), EC Head - Ti (0.5ohm), RTA Base & RTA Cap, Mouthpiece, Atomizer head base and Glass tube.
- 510 thread.
