About Ehpro Billow V2.5 RTA 6ml
Ehpro is a popular vape company that has earned a name for itself due to its consistent demonstrated ability to create top-quality vapes that withstand the test of time. This company strives to create as various a selection of products as they can, and each one has its own merits. Here, you will find a huge selection of Ehpro vapes to choose from, no matter what your tastes are, and each one is offered at a cost-effective price.
Perhaps the most famous and well-loved product from Ephro, the Ehpro Billow is an RTA designed to give you the best possible clouds that a tank can produce. This tank constantly has juice being fed into it, helping to vaporize more liquid at one time without ever having to worry about dry hits. It has a four-post design that makes it easier to build the coils of your choice. Large 2.5-millimeter airflows offer greater control over the way the vape hits for your satisfaction.
Ehpro Billow V2.5 RTA - 6ml, Black
Product Instructions
Parameters
Size: 25 x 54.9 mm (without drip tip)
Capacity: 6ml
Insulater: PEEK
Positive pin: stainless steel
Post: 2 post Velocity Style
Airhole: 2 bottom cyclops airhole
Material: SUS316 + Pyrex Glass + Delrin
Thread: 510
Ehpro Billow V2.5 RTA 6ml contains
- 1 x Billow V2.5 RTA
- 1 x Spare Glass tank
- 1 x Allen Key
- 1 x A Pack of O-rings
- 2 x Heat Wire
- 4 x Set Screws
- 1 x Piece of Japanese Organic Cotton
- 1 x User Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- Rebuildables are for experts, not average or beginner vapers with no knowledge of how to rebuild atomizers.These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
- 510 thread. Compatible with most 510/ego thread batteries.
- You can select the vape juice here.
Features
25mm diameter and 6ml capacity
Top filling
Adjustable dual bottom airflow slots
Adjustable juice flow control
Delrin drip tip
PEEK Insulator
How to install:
1. Install coils right above the 2 airholes on the deck.
2. Wick cotton and make sure both ends of cotton cover the base evenly, especially on the 4 juice-leading holes. Then drip e-juice on cotton until fully absorbed.
3. Connect the sealing tube with the whole base tightly.
4. Install the tank section onto the bottom hardware tightly.
5. Insert the drip tip into top cap.
6. Assembling completed. d
How to refill:
1. Twist the top cap off anticlockwise after juice-leading holes fully closed.
2. Refill it from the filling holes.
3. Screw back the top cap tightly.
4. Twist the chimney clockwise until the juice-leaking hole fully open.
How to adjust the airflow:
Turn AFC ring clockwise to increase the airflow, anticlockwise to reduce the airflow.
